We currently have a situation where the following is installed: 20+ phones (mostly SPA509Gs) via a UC540, which is behind an ASA 5505. We also have several "remote users" that connect with IP Communicators via VPN. We would like to add a remote office (just 2 phones, SPA 509G) to this. But can not get the phone to register. This remote site also has an ASA5505 with a site to site tunnel. I can connect to the UC from the remote site and execute CUE and IOS commands. But the phone will not register. I suspect the problem is the way I'm setting up the phone itself. I suspect I can not use DHCP on the phone. Does the IP address of the phone need to match the local network or the remote network? I have the TFTP server pointing to the same address as our IP Communicators.
Chris are the phone's getting the correct information from the DHCP server that they are getting IP from? you need to make sure you set the option 150 to 10.1.1.1 as long as that is the address the UC that the phones on the main loctions register to. also as stated before you need to make sure all routing is posible both to the main location and from the main location to the remote site espically of the VLan of the phone network. one last thing is if you a firwaling the tunnel you will need to excempt the phone traffic. if you have a firewall issue you could disable it in the tunnel to see if that is the issue and if so then excempt the phone traffic from being blocked.
Welcome back for issue number 2 of the small business support community newsletter. Over the coming months we're going to share exciting news on the hardware and support community side. For now, we'll highlight our new favorite docs, pertinent...
Change in ASD Automatic Software Download Feature
Dec 13th, 2019
Cisco RV160, 260, 340, and 345 Series Routers
Due to an API change in Cisco’s software download platform the Automatic Download Feature (ASD) on RV series routers will be temporarily ...
SFP Module Support List for RV160x and RV260x Devices
Small form-factor pluggable (SFP) ports are included on the RV160 and 260 routers to allow the use of optical SFP transceiver modules. SFP’s convert the optical signals to electrical signals. SFP’s al...
Cisco is excited to offer its San Jose customers a unique opportunity to join us at Cisco headquarters for a design thinking workshop. This exclusive gathering, of no more than 20 people, is designed for an immersive interactive one-day session bet...