Does any one can confirm that SPA962 can communicate with CME (call manager express 4.1) to exchange information about presence (BLF feature on SPA 962) ?
I found a lot of examples how to configure SPA962 to work with Asterisk or Broadsoft. I tried all of them but CME4.1 on Cisco 2651xm can’t communicate with this phone.
All cisco.com documentation is giving an examples of 79xx phone running SIP firmware to work well with CME. I wonder it this is a SPA962 limitation or router configuration problem.
Here are my configuration:
SPA962 (without attendant console) I configured
Administrator->Phone Tab: and see attachment.
Where 10.40.1.1 is my SIP server (cisco CME4.1) and
503 is extension of this unit
501 is en extension whitch I want to monitor on
I’m not sure what is difference between ext and usr so I tried two of it.
************** Router configuration is: *************
voice register dn 1
voice register dn 2
voice register dn 3 <---- this is SPA962
voice register pool 1
id mac 000E.08DB.36B8
number 1 dn 1
voice-class codec 1
blf-speed-dial 1 503 label "tel3"
voice register pool 2
id mac 000E.083A.76E1
number 1 dn 2
voice-class codec 1
voice register pool 3 <--- spa 962
id mac 000E.08D9.5A39
number 1 dn 3
voice-class codec 1
blf-speed-dial 1 501 label "tel1"
**** Debugs with ON:
EPHONE state debugging is enabled (state, error)
EPHONE skinny BLF debugging is enabled
voice-register error debugging is on
voice-register events debugging is on
presence error debugging is on
presence xml debugging is on
presence asnl debugging is on
presence event debugging is on
presence timer debugging is on
presence trace debugging is on
presence info debugging is on
******* Status of presence on CME4.1
a--1#sh presence global
Presence Global Configuration Information:
Presence feature enable : TRUE
Presence allow external watchers : FALSE
Presence max subscription allowed : 100
Presence number of subscriptions : 0
Presence allow external subscribe : TRUE
Presence call list enable : FALSE
Presence server IP address : 0.0.0.0
Presence sccp blfsd retry interval : 60
Presence sccp blfsd retry limit : 10
Presence router mode : CME mode
a--1#sh presence subscription details
Presence Active Subscription Records Details:
a--1#sh presence subscription summary
Presence Active Subscription Records Summary: 0 subscription
Watcher Presentity SubID Expires SibID Status
======================== ======================== ====== ======= ====== ======
Debugs are only seen when I power on/off phone:
May 17 15:15:43.916: VOICE_REG_POOL: Un-Registration for 18 okay, no auth needed
May 17 15:15:43.916: VOICE REGISTER POOL-3 has unregistered. Name:SEP000E08D95A39 IP:10.40.1.4 DeviceType:Phone
May 17 15:15:43.916: VOICE_REG_POOL: delete key(503) contact(ipv4:10.40.1.4:5060)
May 17 15:15:43.916: VOICE_REG_POOL: deleted contact from table
May 17 15:15:43.916: //PRESENCE::/presence_dp_delete_notify:
May 17 15:15:43.916: //PRESENCE::/presence_clear_nodes_by_dpinfo:
May 17 15:15:43.916: //PRESENCE::/presence_dp_delete_notify: No outstanding watched request
May 17 15:15:43.916: VOICE_REG_POOL: deleted key(503) from contact table
May 17 15:15:43.916: VOICE_REG_POOL: Un-Registration for 18 successful
May 17 15:15:56.624: VOICE_REG_POOL: Register request for (503) from (10.40.1.4)
May 17 15:15:56.624: VOICE_REG_POOL: Contact matches pool 3 number list 1
May 17 15:15:56.624: VOICE_REG_POOL: key(503) contact(10.40.1.4) add to contact table
May 17 15:15:56.624: VOICE_REG_POOL: No entry for (503) found in contact table
May 17 15:15:56.624: VOICE_REG_POOL: key(503) contact(10.40.1.4) added to contact table
May 17 15:15:56.624: VOICE_REG_POOL pool->tag(3), dn->tag(3), submask(1)
May 17 15:15:56.624: VOICE_REG_POOL: Creating param container for dial-peer 40001.VOICE_REG_POOL pool->tag(3), dn->tag(3), submask(1)
May 17 15:15:56.628: VOICE_REG_POOL: Created dial-peer entry of type 0
May 17 15:15:56.628: VOICE_REG_POOL: Registration successful for 503, registration id is 19
May 17 15:15:56.628: //PRESENCE::/presence_sip_dp_create: SIP number/tag: [503/40001]
May 17 15:15:56.628: VOICE REGISTER POOL-3 has registered. Name:SEP000E08D95A39 IP:10.40.1.4 DeviceType:Phone
SPA962 : Software Version:6.1.3(a) Hardware Version:1.0.5(3825)
cisco 2651xm router with 12.4.(15)T13 IP voice with CME Version 4.1(0).
Have any ideas what can be wrog ? Maybe SPA 962 is not designed to work with CME4.1 but only with SPA9000 or Linux ?
(For some reason I could not see this question until today).
SPA962 BLF does not interoperate with CME. SPA962 has basic (known as third party in CME terms) SIP interop with CME, this includes registration, making/receiving calls, cfwd, transfer, and conference. All other features are not expected to work.
Did you get this to work.
I'm trying this with CUCME 9.1 and spa525. I se subscribe message on CUCME and ok response.
But line key on SPA525 still blinks orange.
No I didn't. It will never wor. And now when Cisco sold Linksys for sure it will not work. Switch to Cisco IP Phones or move to Asterisk Open Source ;(.