DTMF string in phonebook

[starfleet.technologies]

HI,

I'm using a SPA-504G IP Phone, a SPA-3102 Gateway to my PSTN line, and a 3CX v10 IPBX. I'd like to store DTMF String in my phonebook... How can I do that?

Example:

To forward my line to my cellphone I have to dial 0 (for external line) then *21#

I would like to programm a soft key to send 0w*21# (w stands for a short pause in dialing)

Thx in advance

[paolo bevilacqua]

Wrong forum, try "small business - phones".

However i can tell you already thar is not possible to store pauses in speed-dials.

[starfleet.technologies]

thanks anyway... sorry for the missplaced thread

[starfleet.technologies]

Well paolo...

according to the SPA5xx Administration Guide it is possible to store pauses in speedDials using a comma (,)

page 204 in http://www.cisco.com/en/US/docs/voice_ip_comm/csbpipp/ip_phones/administration/guide/spa500_admin.pdf

[Brandon Svec]

So did you work this out?  What I read on page 204 does not seem to have anything to do with pauses.

[starfleet.technologies]

Oups not a comma but a "P"

Extract from PDF File p.204:
For a pause, enter P followed by a number and a space. 
The duration of the pause is the specified number of seconds

[paolo bevilacqua]

Apologies if my answer is not correct.

But for sure, the matter is better discussed in the appropriate forum, that is not this one.

[starfleet.technologies]

don't worry ^^ thanks anyway I opend a thread in Small Business