10-22-2009 06:51 AM - edited 03-21-2019 01:41 AM
inluded is the screen shot...
UC520
Anyone else having this?
Going into security - NAT
Just adding a basic NAT
click apply and error
10-27-2009 07:39 AM
10-28-2009 05:51 AM
This may be a configuration error. Are you trying to use vlan 100 for outside interface? VLAN 100 is used for voice subnet. You may want to use interface fastethernet 0/0 (WAN) for outside interface.
-Saurabh
10-28-2009 06:42 AM
of course im using FastEthernet0/0.
From a brand new config this is how the error is reproduced.
First delete all firewall settings
Second delete NAT settings
create a VLAN, say 50, create DHCP pool, etc
Make sure FastEthernet0/0 is DHCP
now go into NAT, and try anything that makes a change and requires saving... BOOM error
this is with CCA2.1
from the CLI I have NAT outside for FastEthernet0/0
Nat inside for the VLANs 1 and 50, but not the BVIs (maybe thats an issue)
I also have attempted doing the "VLAN database" and recreating the vlan.dat
so I can ping from the FastEthernet0/0 to outside, but can not ping the outside from any other interface (vlan)
10-28-2009 07:13 AM
Let me run this scenario by the CCA engineering team.
-Saurabh
11-04-2009 04:17 AM
problem is resolved in CCA 2.1.1 !!!!!!!
11-04-2009 04:26 AM
thanks for the good news!!!!!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: