cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to the Cisco Small Business Community

Have a question? Click on a topic board below to get started in the community.
Get the latest news in this issue of the Cisco Small Business Monthly Newsletter

325
Views
0
Helpful
2
Replies

Firmware sync

Hi,

in deep past has always worked...

when SPAXXX starting or syncing in period phone detect firmave version on TFTP/HTTP server and where necessary, updated firmware ... Now don't do it:-( Now phone syncing only cfg:-(.

How can I setting auto upgrade FW?

 

Thanks Michal.

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Advocate

It work still the same way.

It work still the same way. Upgrade Enable to yes and fill the Upgrade Rule. Note it will not fetch the same file again (e.g. Upgrade Rule same) if it has been already fetched. Other firmware needs to have other filename. But's also still the same behavior.

View solution in original post

2 REPLIES 2
Highlighted
Advocate

It work still the same way.

It work still the same way. Upgrade Enable to yes and fill the Upgrade Rule. Note it will not fetch the same file again (e.g. Upgrade Rule same) if it has been already fetched. Other firmware needs to have other filename. But's also still the same behavior.

View solution in original post

Highlighted
Cisco Employee

Re-posted discussion to to

Re-posted discussion to to SPA IP Phones.