If you have both FXO trunk and SIP trunk, you will see them in Outbound Trunks page of the configure utility. You can select them in the order, in which you check the boxes is the order in which the trunks are used for the outbound calls. For example if you select a FXO trunk first and a SIP provider second, the SIP provider is used only when the FXO trunk is busy or down.
There is no failover between SIP and FXO for the inbound calls since inbound phone numbers for FXO and SIP trunk are usually different, and they are routed to a sepecfic destination in the Inbound Calls page. The failover is out of control of UC320W. You may want to check with your service provider.
Change in ASD Automatic Software Download Feature
Dec 13th, 2019
Cisco RV160, 260, 340, and 345 Series Routers
Due to an API change in Cisco’s software download platform the Automatic Download Feature (ASD) on RV series routers will be temporarily ...
SFP Module Support List for RV160x and RV260x Devices
Small form-factor pluggable (SFP) ports are included on the RV160 and 260 routers to allow the use of optical SFP transceiver modules. SFP’s convert the optical signals to electrical signals. SFP’s al...
Welcome and thanks for visiting the Small Business Community Newsletter. This is our first of what we will make a monthly newsletter where you will be provided information on New products and trends, What’s ...
Hello @All ,
I am Bhuvi Chopra, a product manager on the Cisco Business (formerly SBTG) Team.
Cisco Business is excited to offer its San Jose customers a unique opportunity to join us at Cisco headquarters for a design thinki...