Hi James,
It depends on what you want, but what has been tested to work and I know work with the SPA-500 range is as follows:
Wireless:
- CS60 with the handset lifter module, the SPA-500 phones are not HHC compliant so you need the lifter
- CS70N again with the Lifter module
- CS351N and again with the lifter module
I have not been able to test any of the other wireless ranges, basically we only ever buy what the customer can afford and they are the cheapest ones without blowing a budget.
Corded Headsets:
- H251 with the 2.5MM connector adapter (Make sure you order that or you will get an RJ-11 version which will not work)
- H251N, And the same again with the connector situation
- H261 - Connector needs to be the 2.5MM
- H261N - Connector needs to be the 2.5MM
- HW251N - Connector needs to be the 2.5MM
- HW261N - Connector needs to be the 2.5MM
- H41 - Connector needs to be the 2.5MM
- H41N - Connector needs to be the 2.5MM
If you want slightly cheaper headsets then the Jabra Corded headsets are normally about 10% cheaper (Well in my neck of the woods) but the Wireless CS60 is the most popular, the only issue is you might have problems getting it to work with the SPA-500S module if you put one on it, I am having great difficulties with that right now, but I am sure I will find a way around it.
Hope this info helps you out.
Cheers,
David.
Cheers,
David Trad.
**When you rate a persons post, you are indicating a thank you or that it helped, but at the same time you are also helping to maintain the community spirit - You don't have to rate posts and you wont be looked down upon :) *
