01-05-2011 01:45 PM - edited 03-21-2019 03:29 AM
I have just upgraded to CCA 3.0 and in the process it blew out my settings. I've got everything back except the no battery-reversal I need.
I'm able to telnet in through putty and issue some simple show comands (show ephone). If I type "voice-port 0/1/0" exclude qutation marks, it doesn't like the v with the error point at the first letter. Ant Ideas? I have a UC520
Thanks
Solved! Go to Solution.
01-05-2011 01:55 PM
With CCA 3.0, you can change the battery-reversal options from within CCA. Go to Configure > Telephony > Ports and Trunks > PSTN Trunks - Choose the FXO port, and click "edit settings". Battery-reversal option is listed there.
01-05-2011 01:55 PM
are you in config mode?
Brian
01-05-2011 01:55 PM
With CCA 3.0, you can change the battery-reversal options from within CCA. Go to Configure > Telephony > Ports and Trunks > PSTN Trunks - Choose the FXO port, and click "edit settings". Battery-reversal option is listed there.
01-05-2011 02:06 PM
Thanks for the quick response and it was perfect
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: