cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to the Cisco Small Business Community

Have a question? Click on a topic board below to get started in the community.

972
Views
0
Helpful
3
Replies
mhebert
Beginner

Initiate no battery-reversal

I have just upgraded to CCA 3.0 and in the process it blew out my settings. I've got everything back except the no battery-reversal I need.

I'm able to telnet in through putty and issue some simple show comands (show ephone). If I type   "voice-port 0/1/0" exclude qutation marks, it doesn't like the v with the error point at the first letter. Ant Ideas? I have a UC520

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Darren DeCroock
Enthusiast

With CCA 3.0, you can change the battery-reversal options from within CCA.  Go to Configure > Telephony > Ports and Trunks > PSTN Trunks  - Choose the FXO port, and click "edit settings".   Battery-reversal option is listed there.

View solution in original post

3 REPLIES 3
bethingt
Beginner

are you in config mode?

Brian

Darren DeCroock
Enthusiast

With CCA 3.0, you can change the battery-reversal options from within CCA.  Go to Configure > Telephony > Ports and Trunks > PSTN Trunks  - Choose the FXO port, and click "edit settings".   Battery-reversal option is listed there.

View solution in original post

Thanks for the quick response and it was perfect