cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Please be advised, the GuideMe Wizard is no longer available on the Small Business Support Community. For search capability please use the community search field to find content related to Cisco Small Business documents, videos, and discussions.
756
Views
0
Helpful
3
Replies
Beginner

Integration of SPA232D, SPA302 and UC560

I need to integrate a SPA232D, to which they would be connecting two SPA302D with a UC560.

I know through the CEC can not be done, but I guess if it can be done via CLI.

Can anyone tell me the command lines necessary to do this?

Everyone's tags (3)
3 REPLIES 3
Cisco Employee

Re: Integration of SPA232D, SPA302 and UC560

Hello Sir,

Unfortunately the SPA232D and the SPA302 are not a configurable device on the UC560 through CCA or CLI (Not supported). The only other option that may work, would be to use the FXS ports of the UC560 to connect to the FXO of the SPA232D. This should allow you to use the SPA302's as a analog extension.

Highlighted
Beginner

Integration of SPA232D, SPA302 and UC560

Dennis, in this case, what are the options that I check or configure the SPA302 that can function as an analog extension of the UC560

thanks in advance

Hall of Fame Master

Integration of SPA232D, SPA302 and UC560

You can configre these as third-party SIP phones using CLI.