05-25-2013 07:24 AM - edited 03-21-2019 07:23 AM
Hi,
I configured Jabber on a UC500 for some iPhone users. Jabber works pretty well, but numbers from the phones' contacts cannot be called directly, since a additional 0 before the actual number is required to dial outside the customers network.
Is there a way for automaticaly adding these zeroes to numbers called by Jabber extensions, while internal numbers can still be called?
I've looked into translation-profiles and dial-peers but didn't find anything suitable for my problem...
Kind regards,
Rainhard
05-26-2013 07:07 PM
here is a post of similar style that i have already started...
https://supportforums.cisco.com/message/3886100#3886100
Hopefully they will fix this in a release of Jabber!
UC540 system with 8.6.1 Software Pack
06-01-2013 07:57 AM
Hi,
I found a way to "fix" this problem! I configured a seperate COR list and dial-peer for the Jabber users without any translation of the called number. They can now directly dial their phone's contacts.
Kind regards
Rainhard
06-02-2013 03:18 PM
This is good news! Do you mind outlining the steps you did to do this
UC540 system with 8.6.1 Software Pack
06-03-2013 02:56 AM
Hi,
Here's what my configuration looks like:
! COR config
dial-peer cor custom
name JABBER
exit
dial-peer cor list call-JABBER
member JABBER
exit
! Dial-peer for outgoing jabber calls
dial-peer voice
...
corlist outgoing call-JABBER
...
exit
! For every jabber phone
voice register pool
...
cor incoming call-JABBER default
...
exit
Kind regards,
Rainhard
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide