cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Please be advised, the GuideMe Wizard is no longer available on the Small Business Support Community. For search capability please use the community search field to find content related to Cisco Small Business documents, videos, and discussions.
3226
Views
0
Helpful
1
Replies
Beginner

Linksys SPA942 Firmware Not Updating

I am trying to install the 6.1.5 firmware on my IP phones, but it keeps coming back with "Upgrade Failed: No Response from SPA". I unzip the file to my desktop, run the exe and put in the IP address of the phone, but I keep getting the error.

If you put the IP address in the address bar, the phone comes up no problem. I can easily make changes through the web interface, and the phone will reboot, but I can not upgrade the firmware. Is there any other way I can do this? Any reason why this might be happening?

1 REPLY 1
Frequent Contributor

Re: Linksys SPA942 Firmware Not Updating

Check two things

1.  The 'Upgrade Enable' is set to yes.  Located in Provisioning/Firmware upgrade.

2.  Check that the upgrade request reaches the phone, you can check this via a ethereal trace.