We have two sites with the same subnet, 192.168.1.x /24. Want to create a point to point VPN between the two. However the side we control has a UC560 in place. The only traffic needed over this VPN is from a server, 192.168.1.250
Now on an ASA I know you can nat only the server traffic, 192.168.1.250 to 172.16.1.250, which is then allowed over the VPN.
However, can a UC560 handle this? It looks like a UC560 can nat, but then it nats ALL 192.168.1.x traffic, you don't seem to be able to specify only the server (192.168.1.250) traffic.
Am I missing something or will we have to change the network addressing on our side?
