cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to the Cisco Small Business Community

Have a question? Click on a topic board below to get started in the community.

1045
Views
5
Helpful
3
Replies
pascaldery
Beginner

need up update 105 SPA502g firmware

Hi,

We need to update 105 SPA502g phone, from 7.4.9c to 7.5.4 firmware, it take about 15 minutes per phone, i'm pretty sure there is an easy free way to upate more than 1 phone at a time?

Can any one help me out?

Thank you!

3 REPLIES 3
trgood
Beginner

If the phones are pulling their phones loads from a PBX like the UC500 you easily put the new loads in flash and specify a new load statement then rebooting the phones should force them to upgrade.

-Trent Good ** Please rate useful posts! **

Our PBX is trixbox, haven't found the way to do it yet. any other suggestions?

You can use the Cisco SPA Provisioning Guide:

https://supportforums.cisco.com/docs/DOC-9894

Please test it first in a controlled environment before applying it to all phones. Maybe some functionality is broken (like LDAP address book in 7.5.4)

regards

Create
Recognize Your Peers
Polls
How would you describe your level of technical expertise?