Hello,
We have a UC320W connected to 4 SPA504G phones and one analog phone on the FXS port. We are using firmware 2.3.2(6).
Problem: If one extension calls another, the caller cannot hear the receiver talking and after 10 secs or so, the line drops. During the call the receiver can hear the caller talking. This happens calling between any extensions, including the analog phone ie if X200 calls X201, then X200 cannot hear the person on X201. If X201 calls X200, then X201 cannot hear the person on X200. This also happens when trying to transfer external calls to an extension.
When making external calls everything works ok, and when taking inbound calls everything works ok. The system was installed last week and has always been like this. Any pointers as to how to narrow down the problem? Thanks
