cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to the Cisco Small Business Community

Have a question? Click on a topic board below to get started in the community.
Get the latest news in this issue of the Cisco Small Business Monthly Newsletter

4198
Views
0
Helpful
2
Replies
Beginner

Outpulsed Digits from the telco switch

In preparation for a UC540 deployment with PRI card the telco asked two questions that we were not sure about and wanted to see if anyone could shed some light one these questions

3. What is the number of Outpulsed Digits (digits we send to you from our Switch)?

4. Are there any unacceptable Lead Digits in the Outpulsed Digits?

Thank you in advance.

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Enthusiast

Re: Outpulsed Digits from the telco switch

The number of accepted digits you accept depends on your dial plan.  Outpulsed digits are the amount of digits the telco sends to you so that your gateway can process and route the call.  If you use four digit extensions then you should accept four.

View solution in original post

2 REPLIES 2
Highlighted
Enthusiast

Re: Outpulsed Digits from the telco switch

The number of accepted digits you accept depends on your dial plan.  Outpulsed digits are the amount of digits the telco sends to you so that your gateway can process and route the call.  If you use four digit extensions then you should accept four.

View solution in original post

Highlighted
Beginner

Re: Outpulsed Digits from the telco switch

Thanks for confirming this.