04-11-2012 08:32 AM - edited 03-21-2019 05:38 AM
Hi All
I have a UC560, CME version 8.1 with 20 phones, some phones are SPA504 (7.4.8a)
and others are SPA525G2 (7.4.9a)
Here it is the paging-dn config:
ephone-dn 1
number 101 no-reg primary
description IP-Paging1
name Office Page
paging ip 239.1.1.1 port 2000
The strange behavior I get is that not all phones are receiving the paging and this occur randomly between phones, sometimes one phone works fine and sometimes it doesn't.
Thanks for any help
04-11-2012 09:01 AM
Hi
Have you added the paginging DN to you e-phones
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmepage.html#wp1010640
Something like this
!
!
ephone 5
mac-address 0019.E72C.2050
paging-dn 1
type 7971
button 1:1 2:2
!
Regards
Alex
04-11-2012 12:02 PM
Hi acampbell
Yes, all the ephones have the paginig-dn 1 configured.
04-16-2012 09:50 AM
Hello Guys
This issue was solved by configuring the paging in multicast mode,then create a new CNF-file and finally reset all phones.
Thanks
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: