cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Paging system is not working in all phones (UC560)

diego_ers
Beginner
Beginner

Hi All

I have a UC560, CME version 8.1 with 20 phones, some phones are SPA504 (7.4.8a)

and others are SPA525G2 (7.4.9a)

Here it is the paging-dn config:

ephone-dn  1

number 101 no-reg primary

description IP-Paging1

name Office Page

paging ip 239.1.1.1 port 2000

The strange behavior I get is that not all phones are receiving the paging and this occur randomly between phones, sometimes one phone works fine and sometimes it doesn't.

Thanks for any help

3 REPLIES 3

acampbell
Advocate
Advocate

Hi

Have you added the paginging DN to you e-phones

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmepage.html#wp1010640

Something like this

!

!

ephone  5

  mac-address 0019.E72C.2050

paging-dn 1

type 7971

button  1:1 2:2

!

Regards

Alex

Regards, Alex. Please rate useful posts.

Hi acampbell

Yes, all the ephones have the paginig-dn 1 configured.

diego_ers
Beginner
Beginner

Hello Guys

This issue was solved by configuring the paging in multicast mode,then create a new CNF-file and finally reset all phones.

Thanks

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: