cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
835
Views
0
Helpful
4
Replies
Highlighted
Beginner

Phones are not registering

Hi this is newbie question. I went through and did and manual setup of the BE3000 added several users to a usage profile and associated phone to the users. Finally I  plugged the phones in to the network and they are not registering. I am assuming the phones need to know who to find the telephone system. What am I missing?

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Cisco Employee

If you do not want to manually enter tftp ip address (and have static IP address for phones), you can also setup DHCP and with option 150 to point to tftp server.

Thanks

View solution in original post

4 REPLIES 4
Highlighted
Beginner

Hi,

Please check the tftp IP on the Phone. ensure BE3000 IP is given on tftp IP. Also ensure Phone IP is reachable to BE3000.

Highlighted

Hello,

The phones are not recivieing TFTP address for the BE. How does the TFTP server address get to the Phones?

Highlighted
Cisco Employee

If you do not want to manually enter tftp ip address (and have static IP address for phones), you can also setup DHCP and with option 150 to point to tftp server.

Thanks

View solution in original post

Highlighted

No I wanted to do it via DHCP but was not sure how. So it is called DHCP option 150. Okay I will look that up.

Thanks!