About to purchase the UC320W and had a quick look at the online emulator.
Plan to use with a single analogue trunk and also a SIP trunk.
Is it possible to have a separate steering digit for the outside line, ie dial 8 for outside analogue trunk or dial 9 for outside SIP trunk?
Or is it possible to modify the dial plan that certain types of calls are forced out a particular route, i.e. all mobile calls are forced out the analogue trunk and never over the SIP (this is what I want to achieve).
Join us for an exclusive Cisco Customer Connection online briefing: Introducing Cisco Business Wireless Access Points and Mesh Extenders on February 25 at 8 am PT. Cisco product managers will provide a technical deep dive on these new wireless products t...
QuestionDear All,I'm currently looking for firmware version 188.8.131.52 for Linksys SPA400 Analog Telephony Gateway. Unfortunately, my device was bricked and I was able to recover it using a recovery tool and recovery firmware version 184.108.40.206 but can't find v...
Change in ASD Automatic Software Download Feature
Dec 13th, 2019
Cisco RV160, 260, 340, and 345 Series Routers
Due to an API change in Cisco’s software download platform the Automatic Download Feature (ASD) on RV series routers will be temporarily ...
SFP Module Support List for RV160x and RV260x Devices
Small form-factor pluggable (SFP) ports are included on the RV160 and 260 routers to allow the use of optical SFP transceiver modules. SFP’s convert the optical signals to electrical signals. SFP’s al...