01-04-2022 03:16 AM - edited 01-04-2022 03:17 AM
I have sitches with untagged data VLAN (68) and tagged VLAN for phones (70), but with no CDP or LLDP support. And some SPA112.
I want to push the VLAN ID 70 to the SPA112 by the DHCP.
I can't fix the value of the VLAN ID in the configuration file of the SPA because I use this file for an other network too
I didn't find any DHCP option or way to push the VLAN ID
01-04-2022 09:20 AM
what switches is this ? what is the configuration on the access port ?
what DHCP Server you using ?
01-05-2022 05:49 AM
I use FlexNetwork 5130 Switch jg937a
I use a DHCP server Windows 7 server
Configuration of the access port :
interface GigabitEthernet1/0/37
port link-type hybrid
undo port hybrid vlan 1
port hybrid vlan 70 tagged
port hybrid vlan 68 untagged
port hybridpvid vlan 68
stp edged-port
poe enable
interface Vlan-interface68
ip address 10.68.x.y 255.255.255.0
dhcp select relay
dhcp relay server-address @ip_DHCP
interface Vlan-interface70
ip address 10.70.x.y 255.255.255.0
dhcp select relay
dhcp relay server-address @ip_DHCP
01-15-2022 01:56 PM
There's no such option in DHCP recognized by SPA112.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: