Solved: Registration not complete 9971 CCA3.2.1 UC540

Jeremy Koch · ‎07-06-2012

Hi, can anyone help me with getting my 9971 to register properly with my UC540? i can make and receive calls just fine etc, but the time is wrong and i am getting these errors in the stauts so its clearly not working right...

UC540 system with 8.6 Software Pack

UC540 system with 8.6.2 Software Pack

bjames · ‎07-06-2012

Jeremy,

Ours do the same thing. I started a thread on the time and everything I've tried doesn't work it's still an hour behind. Those are the same errors we get, but everything works so I'm not too concerned. The 9951/71's have "limited functionality" according to the documents on teh UC, but other than the time they seem to work fine.

I hope this helps

Bob James

View solution in original post

bjames · ‎07-06-2012

Jeremy,

Ours do the same thing. I started a thread on the time and everything I've tried doesn't work it's still an hour behind. Those are the same errors we get, but everything works so I'm not too concerned. The 9951/71's have "limited functionality" according to the documents on teh UC, but other than the time they seem to work fine.

I hope this helps

Bob James