I have a customer that wants to have the UC540 emulate their existing Norstar KEY system. They have 6 lines and 15 stations. I have already setup and tested a hybrid KEY system in my lab with FXO's as shared lines https://supportforums.cisco.com/docs/DOC-15755 . This works fine. The only problem is ican not select several phones to ring and several phones not to ring when a call comes in to the FXO trunk. Either all the phones have to ring or all the phones are silent ring, not a mix of both. Is there a way around this? Perhaps in CLI.
You can comfigure individual phones sharing a DN, with 's' button for silent ring. Note this is a CLI command, I don't know and can't answer if that can be done using CCA.
You can comfigure individual phones sharing a DN, with 's' button for silent ring. Note this is a CLI command, I don't know and can't answer if that can be done using CCA.
