04-24-2014 08:56 AM - edited 03-21-2019 08:13 AM
Is it possible to run a SF 200-24P switch on a UC560 thru the expansion port?
I already have a SF 200-24P and I am trying to avoid buying another switch?
Anyone have a document or knowledge of this?
Thanks
Keith
Solved! Go to Solution.
04-26-2014 05:31 AM
Hello Keith,
Yes it is possible. You need to switch the port to trunk or change the smartport role.
In CCA also it is very easy. The switch is supported in CCA also. You may check the CCA (3.2.1) admin guide:
http://www.cisco.com/c/dam/en/us/td/docs/net_mgmt/cisco_configuration_assistant/version3_2_1/administration_guide/cca_sbcs_admin_guide.pdf
HTH,
Alex
*Please rate helpful posts
04-26-2014 05:31 AM
Hello Keith,
Yes it is possible. You need to switch the port to trunk or change the smartport role.
In CCA also it is very easy. The switch is supported in CCA also. You may check the CCA (3.2.1) admin guide:
http://www.cisco.com/c/dam/en/us/td/docs/net_mgmt/cisco_configuration_assistant/version3_2_1/administration_guide/cca_sbcs_admin_guide.pdf
HTH,
Alex
*Please rate helpful posts
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: