cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Please be advised, the GuideMe Wizard is no longer available on the Small Business Support Community. For search capability please use the community search field to find content related to Cisco Small Business documents, videos, and discussions.
560
Views
0
Helpful
5
Replies
Highlighted

Sharing Analog line via IP to UC560

I have a remote location that have an analog line that I need to be able to dial out from the UC560.

So If I am calling 911 I want my call to getout at this analog line locate in a different place.

We are sharing our UC560 in two different building and calling 911 make information show from the other building. Our phone companie can provide E911 to overcome this, but it is really costly.

I was looking for some FXS connector to share the POTS line back to my UC560.

Thank

Sylvain Duchesne

Everyone's tags (3)
5 REPLIES 5
Hall of Fame Master

Sharing Analog line via IP to UC560

You can add a VIC2-2FXO card in the UC500 free slot.

Re: Sharing Analog line via IP to UC560

Dear Paolo, keep in mind that this POTS is locate in a separate building only link with IP (with a WiFi bridge).

I have found this device ; http://www.voiplink.com/Zoom_5801_p/zoom-5801.htm that SHOULD be compatible with the UC560.

thank

Sylvain

Hall of Fame Master

Sharing Analog line via IP to UC560

You should look also at the FXO adapters from the Cisco small business line of products.

Sharing Analog line via IP to UC560

Hello PAolo, do you have a part number... the only thing I found is from Linksys division.

Thank

Sylvain

Hall of Fame Master

Re: Sharing Analog line via IP to UC560