Sharing Analog line via IP to UC560

[Sylvain Duchesne]

I have a remote location that have an analog line that I need to be able to dial out from the UC560.

So If I am calling 911 I want my call to getout at this analog line locate in a different place.

We are sharing our UC560 in two different building and calling 911 make information show from the other building. Our phone companie can provide E911 to overcome this, but it is really costly.

I was looking for some FXS connector to share the POTS line back to my UC560.

Thank

Sylvain Duchesne

[paolo bevilacqua]

You can add a VIC2-2FXO card in the UC500 free slot.

[Sylvain Duchesne]

Dear Paolo, keep in mind that this POTS is locate in a separate building only link with IP (with a WiFi bridge).

I have found this device ; http://www.voiplink.com/Zoom_5801_p/zoom-5801.htm that SHOULD be compatible with the UC560.

thank

Sylvain

[paolo bevilacqua]

You should look also at the FXO adapters from the Cisco small business line of products.

[Sylvain Duchesne]

Hello PAolo, do you have a part number... the only thing I found is from Linksys division.

Thank

Sylvain

[paolo bevilacqua]

You can use those as well. Otherwise look for one with FXO port.

http://www.cisco.com/cisco/web/solutions/small_business/products/voice_conferencing/small_business_voice_gateways/index.html