06-21-2013 01:09 AM - edited 03-21-2019 07:29 AM
Good morning
I need to configure a SIP trunk between a UC560 and Asterisk.
I have already set up the Asterisk Trunk, routes incoming and outgoing calls.
At the moment all SIP calls proventienti dall'Asterisk and directed to the UC560 work regularly.
I have some problems on calls from dall'UC560 directed to Asterisk.
UC tells me that "The Number you have dialed is not in service"
I have enabled debugging on Asterisk SIP and I noticed the following:
pbxpi * CLI>
<--- SIP read from UDP :/ / 192.168.0.227:57446 --->
ACK sip: 701@192.168.0.230: 5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.0.227:5060; branch = z9hG4bK57231F
From: "UC Extension" <sip:311@192.168.0.230>; tag = 1F7C8C-16B
To: <sip:801@192.168.0.230>; tag = as707a2df5
Date: Fri, 21 Apr 2013 07:39:38 GMT
Call-ID: 8F6EE81A-D97C11E2-8065DF0E-CD1EB93@192.168.35.227
Max-Forwards: 70
CSeq: 101 ACK
Allow-Events: telephone-event
Content-Length: 0
The problem seems to be that, typing 801 on a phone connected to the UC560 the "To" field contains "@192.168.0.230" (which is the IP address of the UC)
Unlike a SIP call made by a PC connected to UC560 with SotPhone attested to Asterisk I note the following:
<--- SIP read from UDP :/ / 192.168.10.12:5070 --->
ACK sip: SIP/2.0 301@192.168.0.230
Via: SIP/2.0/UDP 192.168.10.12:5070; rport; branch = z9hG4bK2932784
To: <sip:301@192.168.0.230>; tag = as59a60f05
From: "SoftPhone" <sip:701@192.168.0.230>; tag = 7185
Call-ID: 1371751226-2784-COMPUTER-NAME@5.98.211.178
CSeq: 457 ACK
Max-Forwards: 20
User-Agent: NCH Software Express Talk 4.28
Authorization: Digest
Content-Length: 0
The Field "To" is properly compiled!!! Can you give me some guidance to solve the problem?
Thank you very much in advance
Solved! Go to Solution.
06-21-2013 03:11 AM
Under sip-ua, configure sip-server with the 3rd party address, not the UC address.
Also registrar (if used) should be another system address, not local.
06-21-2013 02:28 AM
Post UC500 configuration.
06-21-2013 02:47 AM
06-21-2013 03:11 AM
Under sip-ua, configure sip-server with the 3rd party address, not the UC address.
Also registrar (if used) should be another system address, not local.
06-21-2013 07:01 AM
Thanks a Lot!
06-21-2013 07:03 AM
Thank you for the nice rating and good luck!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: