Please be advised, the GuideMe Wizard is no longer available on the Small Business Support Community. For search capability please use the community search field to find content related to Cisco Small Business documents, videos, and discussions.
Smart Callconnector operator standalone fails after reboot.
I have a uc560 of which I just installed Smart callconnector operator standalone on a reception pc. All works great after installation. After re-boot of the PC (windows 7 pro 64bit) The operator console fails to connect to the router and the management interface also fails to do anything other than try and contact local host. At set up I put in the uc560 ip address as the router. It seems that after the reboot the default router\server resets itself to the IP address of the local machine the stand alone client is on. Could it be services not starting causing the issue? Seems the only thing that fixes the problem is a complete uninstall and reinstall of the call connector software.
A consumer router may support a virtual private network (VPN) connection, but that's a far cry from the network and security capabilities that a business-class router can provide. All it takes is some IT talent and know-how to set one up. You're hear...
Cisco RV340 Series Secure Router
Security License Features and Performance
Today, secure networking is imperative for every business, even the smallest one. The RV340 series security routers provides business users with advanced connectivity and...
Recorded Live at SpiceWorld 2018!With the increasing complexity of technology lengthy configurations, dealing with multiple vendors, constant updates and maintenance –it can feel like you are navigating an unruly IT jungle. Join Cisco's Amy Blanchard as s...
Small Business Networking Products
Network and Smart Storage
FindIT Network Management
Voice and Conferencing
ATAs, Gateways,and Accessories
This document is attempt to recreate content of original document created by famous @Patrick Born. Cisco has considered to destroy such valuable document for an unknown reason.In order to capture debug and syslog messages from your SPA1x2 and SPA232D phon...