cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Please be advised, the GuideMe Wizard is no longer available on the Small Business Support Community. For search capability please use the community search field to find content related to Cisco Small Business documents, videos, and discussions.
1331
Views
5
Helpful
4
Replies
Highlighted
Beginner

SP504G firmware upgrade

Hello,

I am trying to upgrade SPA 504G using the utility that is bundled in the package, from computer which is connected on its LAN port (same subnet). Current version is  7.4.8 and tying to upgrade to latest 7.5.1

I can open the GUI, ping it, but this utility is giving error "Upgrade Failed: No Response from SPA".

Is there an option which needs to be enabled through GUI ? Or is there any other way tp upgrade it. This phone is connected with a service provider and reason for upgrade is that its loosing registrations. Not sure if upgrade will help in fixing the registration lost problem.

Any help ?

Thanks

-Azher

Everyone's tags (4)
4 REPLIES 4
Frequent Contributor

SP504G firmware upgrade

Have you verified that you shut off any software firewall or antivirus software temporarily so the phone can communicate fully with the pc for the software download?

Beginner

SP504G firmware upgrade

Yes, it was firewall issue on local Windows XP system.

Thanks

Beginner

SP504G firmware upgrade

I'm having this issue too going from 7.4.3 to 7.5.2b.  Firewall and antivirus are off..Any help?

Beginner

Re: SP504G firmware upgrade

Dear,
You can upgrade firmware without utility.
Just open your favorite navigator (firefox, etc) and put a line like this

Http://ipofciscospa/admin/upgrade?http://ipofawebserver/thethefirmware.
Or like this
http://10.0.0.50/admin/upgrade?http://public.ciscosupport.eu/spa50x-30x-7-5-2b.bin

http://10.0.0.50/admin/upgrade?http://public.ciscosupport.eu/spa50x-30x-7-5-3.bin

Please note,, you must first upgrade to 752b before .... See release note of firmware

Look too on provisioning tab, there are somes settings for upgrade rule maybe to change.

Sent from Cisco Technical Support iPad App