I am working a FreePBX system that implements Cisco SPA 300 series and 500 series solely. I have been trying to find more information regarding programming the line buttons for special features, like call pickup, and the lower 4 programmable buttons, but I can't seem to find any proper documentation. Any help would be greatly appreciated.
Also if anyone has experience with provisioning these devices in a FreePBX environment I would love any and all pointers on that as well.
Although not specific to FreePBX, this document map may help you.
There is a lot of information specific to FreePBX out on the Internet. When searching, keep in mind that FreePBX is based on Asterisk and that the SPA5xx and SPA3xx IP phones are children of the SPA9xx phones so you may find more help by searching using the SPA942 as a model number, for example.
Welcome back for issue number 2 of the small business support community newsletter. Over the coming months we're going to share exciting news on the hardware and support community side. For now, we'll highlight our new favorite docs, pertinent...
Change in ASD Automatic Software Download Feature
Dec 13th, 2019
Cisco RV160, 260, 340, and 345 Series Routers
Due to an API change in Cisco’s software download platform the Automatic Download Feature (ASD) on RV series routers will be temporarily ...
SFP Module Support List for RV160x and RV260x Devices
Small form-factor pluggable (SFP) ports are included on the RV160 and 260 routers to allow the use of optical SFP transceiver modules. SFP’s convert the optical signals to electrical signals. SFP’s al...
Cisco is excited to offer its San Jose customers a unique opportunity to join us at Cisco headquarters for a design thinking workshop. This exclusive gathering, of no more than 20 people, is designed for an immersive interactive one-day session bet...