Hi,
Trying to configure new SPA303 phones with SPA500s extension to work with CME on a ISR via SIP. Everything works fine, i can receive and make internal and external calls, but there is one problem. I am using a macro to set available line buttons mode to Speed Dial + Busy Lamp Field (BLF) Presence. The macro is: fnc=sd+blf;usr=test@192.168.4.1:5060;ext=101@192.168.4.1:5060. Speed Dial works with this macros, but line status does not. The line key is neither green, nor orange, neither solid, nor blinking. It is extinguished.
Hope anyone can help.
