cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

SPA500S with SPA500 phones and UC520

henie
Beginner
Beginner

Hi Team,

I have got a few question around SPA500S, please see the details as below.

1. When using SPA500S with SPA500 phones and UC520, as all those except SPA500S support SPCP, so could we use SPA500S in SIP mode and keep SPA500 phones in SPCP mode ?

2. The information on configuring presence at http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmepres.html#wp1010902  should apply to the SPA500S ?

3. What is the behaviour of pressing a blf-speed-dial button on the SPA500S while the associated phone has an active call ?  And what knobs can I turn to affect the behaviour?

Thanks,

Henry

1 ACCEPTED SOLUTION

Accepted Solutions

Steven Smith
Rising star
Rising star

The SPA500s does work in SPCP mode in the 8.0 software pack.  When working with the SPA500 phones on a UC500 running in SPCP, it will not work in SIP mode.  The following link doesn't apply since it will not be running SIP.

View solution in original post

2 REPLIES 2

Steven Smith
Rising star
Rising star

The SPA500s does work in SPCP mode in the 8.0 software pack.  When working with the SPA500 phones on a UC500 running in SPCP, it will not work in SIP mode.  The following link doesn't apply since it will not be running SIP.

Thanks Steven.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: