cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
1996
Views
0
Helpful
3
Replies
Highlighted
Beginner

SPA502G Dictionary --> FRENCH

Hi,

First, excuse me for my bad english, i do my best.

I try to make my SPA502G in French, i install a tftp server and it work well, but SPA502G still in english.

I use this command: serv=tftp://<tftp_server_addr>/;d0=English-US;x0=spa525_EN_7_2_5.xml;d1=French;x1=spa525_FR_7_2_5.xml;

The tftp server upload the file to the SPA502G, no error in tftp server, but always in english.

All my SPA502G have the latest firmware 7.4.3 but the dictionary is 7.2.5, Problem between version????

Please help me!!

Thank you

3 REPLIES 3
Highlighted
Cisco Employee

Dear Sir;

The issue is that you are using the wrong dictionaries. For SPA50X phones, please use the SPA9XX dictionaries.

Regards;
Alberto

Highlighted

Hello,

It's OK one Cisco technician give me the dictionnary "frS_FR_v615.xml" and all work well now.

Thanks.

Highlighted

Hi,

I use the same parameters for SPA 502G.

Software version : 7.4.4

I did  :

serv=tftp://TFTP_IP_ADDRESS/;d0=English;x0=enS_US_v615.xml;d1=French;x1=frS_FR_v615. xml

On the TFTP logs (Linux server) , i have this :

Apr 21 08:53:50 TFTP_IP_ADDRESS in.tftpd[25204]: RRQ from TELEPHON_IP_ADDRESS filename enS_US_v615.xml
Apr 21 08:53:51 TFTP_IP_ADDRESS in.tftpd[12192]: RRQ from TELEPHON_IP_ADDRESS filename frS_FR_v615. xml

But when i setup French as language on the IP telephon, it stays in English.

Have you some ideas?

Regards

Philippe