cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Please be advised, the GuideMe Wizard is no longer available on the Small Business Support Community. For search capability please use the community search field to find content related to Cisco Small Business documents, videos, and discussions.
1241
Views
0
Helpful
1
Replies
Highlighted

SPA50XG BLF

I have a SPA508G, and I have gotten BLF to work great on unused lines, and I am trying to figure out how to set up BLF status on an extension or line in use. What I mean by this is I have an extension set up and in use, and I would like to assighn the status light to a different extension displaying the status of that line, not the one I am on. The admin manual only give instuctions on assighning BLF to unused line buttons on the phone. Any help or ideas would be appreciated.

Everyone's tags (5)
1 REPLY 1
Cisco Employee

SPA50XG BLF

Hi Computer Business,

I don't really follow what you're trying to accomplish. BLF can only be configured on an unused extension of the monitoring phone.

Perhaps the following will be of use to you:

BLF on Asterisk:

   https://supportforums.cisco.com/docs/DOC-9958 [Unused buttons are configured the same way as SPA500S buttons]

BLF on Broadsoft:

   https://supportforums.cisco.com/docs/DOC-9977

Regards,

Patrick

----------

   Patrick Born | Technical Marketing Engineer (TME) – SPA SIP Endpoints
                   Use this reference document to locate SPA phone resources