We have a SPA8000 connected to a UC540. After about two days of working, it starts acting flakey. They have 2 phones and 1 fax machine. When the phones try to dial out, they get a busy signal. The fax can dial out no problem. When you call into the system, the phones ring and you can answer them and talk no problem. If you do not pick up, it should go to voicemail. It says 'there is no mailbox associated with this extension.' I changed the cfna from the voicemail pilot to the transfer to voicemail prefix + the extension and that get the external caller into the mailbox. It seems like the extension information is getting hosed somewhere along the line.
A debug showed this information:
708673: Mar 23 16:48:06.779: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Calling Number=anonymous, Called Number=, Voice-Interface=0x0,
Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE,
Peer Info Type=DIALPEER_INFO_SPEECH
708674: Mar 23 16:48:06.779: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Result=NO_MATCH(-1) After All Match Rules Attempt
708675: Mar 23 16:48:06.779: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:
dialstring=NULL, saf_enabled=0, saf_dndb_lookup=0, dp_result=-1
708676: Mar 23 16:48:06.783: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Calling Number=anonymous, Called Number=, Voice-Interface=0x0,
Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE,
Peer Info Type=DIALPEER_INFO_SPEECH
708677: Mar 23 16:48:06.783: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Result=NO_MATCH(-1) After All Match Rules Attempt
Not sure if that information has anything to do with anything but maybe it does.
