cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to the Cisco Small Business Community

Have a question? Click on a topic board below to get started in the community.

182
Views
0
Helpful
0
Replies
Grizzly_Adam
Beginner

SPA8000 - Rings, Can Answer, But No Voice

I have an SPA set up and I can call amongst lines 2-8, but when the phones connect there is no sound, no voice, nothing.

 

For instance, I call line 3 from line 4. Line 3 rings, I pick up and a connection is made. There is no voice. If I push buttons on line 4 and can hear them locally on line 4-- but line 3 does not hear it. If I push buttons on line 3, I can hear them locally on line 3 but cannot hear them on line 4. I hang up either phone, the other phone does not seem to notice.

 

If I dial **** on either line, I can interact with the menus. Any idea on getting the lines communicating with each other? Below is my call plan.

 

(*xx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.| 
<5152950001:101>S0<:@192.168.1.1:5060>|
<5152950002:102>S0<:@192.168.1.1:5061>|
<5152950003:103>S0<:@192.168.1.2:5160>|
<5152950004:104>S0<:@192.168.1.2:5161>|
<5152950005:105>S0<:@192.168.1.3:5260>|
<5152950006:106>S0<:@192.168.1.3:5261>|
<5152950007:107>S0<:@192.168.1.4:5360>|
<5152950008:108>S0<:@192.168.1.4:5361>| )
0 REPLIES 0
Create
Recognize Your Peers
Polls
How would you describe your level of technical expertise?