cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Please be advised, the GuideMe Wizard is no longer available on the Small Business Support Community. For search capability please use the community search field to find content related to Cisco Small Business documents, videos, and discussions.
844
Views
0
Helpful
2
Replies
Highlighted
Beginner

Speeddial transfer disconnects call

After upgrading to firmware version 7.4.7, the SPA-504G phone disconnects the existing call when a speeddial button is pressed.  This problem occurs with 7.4.7, 7.4.6, 7.4.4, but does NOT occur in 7.4.3.  This problem occurs with both fnc=blf+sd and fnc=sd for the "Extended Function" field.  Here's a sample case:

1. Someone calls your phone (extension 200)

2. You want to transfer the call to someone on speeddial (e.g. extension 201)

3. You press the corresponding speed dial button, and wait for the XferLx softkey to appear.

4. Instead, immediately after you press the speed dial button, the call is terminated.

This issue does not occur on a SPA-508G with the same firmware versions (only the SPA-504G).  Seems to be either a firmware bug, or an option I've missed.

After updating to Asterisk 1.8.2, this issue seems to be resolved.

Thanks,

-Alex Hieronymi

alex@ph3k.com

2 REPLIES 2
Beginner

Re: Speeddial transfer disconnects call

Issue also occurs with the SPA-508G running 7.4.7 (corrected the above post)

Beginner

Re: Speeddial transfer disconnects call

Sorry, issue is resolved with 7.4.7.