I have a strange problem. We have a UC540 running 8.0.2 with SSL VPN enabled.
There is a 525G phone that connects remotely.
Every few days or so, the VPN stops working and phone does not connect. When I try to connect from a computer, it tries to establish the VPN connection and then eventually hangs or gives me a "AnyConnection was not able to establish a connection to the specified secure gateway. Please try connecting again." . When I reboot the box, VPN works again.
Will this be fixed by upgrading to 8.0.4 or 8.0.5? Anyone else having such an issue?
Without upgrading the software, is there a command I can use to reset the VPN so that it starts working again without the reboot?
QuestionDear All,I'm currently looking for firmware version 184.108.40.206 for Linksys SPA400 Analog Telephony Gateway. Unfortunately, my device was bricked and I was able to recover it using a recovery tool and recovery firmware version 220.127.116.11 but can't find v...
Change in ASD Automatic Software Download Feature
Dec 13th, 2019
Cisco RV160, 260, 340, and 345 Series Routers
Due to an API change in Cisco’s software download platform the Automatic Download Feature (ASD) on RV series routers will be temporarily ...
SFP Module Support List for RV160x and RV260x Devices
Small form-factor pluggable (SFP) ports are included on the RV160 and 260 routers to allow the use of optical SFP transceiver modules. SFP’s convert the optical signals to electrical signals. SFP’s al...
Welcome and thanks for visiting the Small Business Community Newsletter. This is our first of what we will make a monthly newsletter where you will be provided information on New products and trends, What’s ...