There are some some issues (e.g. "no shutdown of voice-port") that causes every month a service loss on the UC. The issues aren't solvet yet, so the costumer call's every few weeks, that the services are failing. The issues can only be solved, by reloading the UC. I thought, it would be bether that way, as let the costumers get mad, until the issues are fixed.
Thanks @Marcos: I didn't know, that a module-reload can damage the module.
I have a few UC's out there with the same issues but I hope, the costumers are going sooner or later from analog to digital, so those issues woldn't be relevant anymore :-)
Join us for an exclusive Cisco Customer Connection online briefing: Introducing Cisco Business Wireless Access Points and Mesh Extenders on February 25 at 8 am PT. Cisco product managers will provide a technical deep dive on these new wireless products t...
QuestionDear All,I'm currently looking for firmware version 18.104.22.168 for Linksys SPA400 Analog Telephony Gateway. Unfortunately, my device was bricked and I was able to recover it using a recovery tool and recovery firmware version 22.214.171.124 but can't find v...
Change in ASD Automatic Software Download Feature
Dec 13th, 2019
Cisco RV160, 260, 340, and 345 Series Routers
Due to an API change in Cisco’s software download platform the Automatic Download Feature (ASD) on RV series routers will be temporarily ...
SFP Module Support List for RV160x and RV260x Devices
Small form-factor pluggable (SFP) ports are included on the RV160 and 260 routers to allow the use of optical SFP transceiver modules. SFP’s convert the optical signals to electrical signals. SFP’s al...