Hi I am having a problem with a UC 540 where there is only one way audio. Initially I was having it with outgoing SIP calls which I am still troubleshooting but as a temporary solution I had made all outgoing calls via PSTN. This had the same result, I can hear the person I am calling from the VoIP phone but the caller cannot hear me.
I have done the Impedance test and all but still no luck.
Also, In regards to the SIP problem, from the SIP server side the RTP packets are being sent but not getting a reply from the UC. The UC has been configured using CCA and also the router connected to it does not have any firewall or access list blocking it.
I have attached my entire configurations below, with a few debug files.
Your thoughts and suggestions are welcome. Thank you.
QuestionDear All,I'm currently looking for firmware version 220.127.116.11 for Linksys SPA400 Analog Telephony Gateway. Unfortunately, my device was bricked and I was able to recover it using a recovery tool and recovery firmware version 18.104.22.168 but can't find v...
Change in ASD Automatic Software Download Feature
Dec 13th, 2019
Cisco RV160, 260, 340, and 345 Series Routers
Due to an API change in Cisco’s software download platform the Automatic Download Feature (ASD) on RV series routers will be temporarily ...
SFP Module Support List for RV160x and RV260x Devices
Small form-factor pluggable (SFP) ports are included on the RV160 and 260 routers to allow the use of optical SFP transceiver modules. SFP’s convert the optical signals to electrical signals. SFP’s al...
Welcome and thanks for visiting the Small Business Community Newsletter. This is our first of what we will make a monthly newsletter where you will be provided information on New products and trends, What’s ...