I am having a similar problem. Although, my config is MUCH SIMPLER! As Jason Nickle pointed out, only VLAN 1 (for data) and VLAN 100 (for voice). I have the UC320 set up as the EDGE device in my customer's network. I am trying to do some very simple port forwarding to a Cisco SF308 Managed POE switch. However, it's not working. The basic idea is i'd like to be able to manage the phone system and the switch remotely. I was thinking something like 199.7.199.x:8080 for the UC320 and then port forward 199.7.199.x:8090 to the switch @ 192.168.24.2 on VLAN 1. The switch is set up properly as i can http to it just fine on the LAN side. Any thoughts?
QuestionDear All,I'm currently looking for firmware version 22.214.171.124 for Linksys SPA400 Analog Telephony Gateway. Unfortunately, my device was bricked and I was able to recover it using a recovery tool and recovery firmware version 126.96.36.199 but can't find v...
Change in ASD Automatic Software Download Feature
Dec 13th, 2019
Cisco RV160, 260, 340, and 345 Series Routers
Due to an API change in Cisco’s software download platform the Automatic Download Feature (ASD) on RV series routers will be temporarily ...
SFP Module Support List for RV160x and RV260x Devices
Small form-factor pluggable (SFP) ports are included on the RV160 and 260 routers to allow the use of optical SFP transceiver modules. SFP’s convert the optical signals to electrical signals. SFP’s al...
Welcome and thanks for visiting the Small Business Community Newsletter. This is our first of what we will make a monthly newsletter where you will be provided information on New products and trends, What’s ...