I'm installing a UC320 fo a client and I would like to use a Draytek Vigor 120 ADSL ethernet modem. The modem requires that a PPoE connection is used on the UC320. I configured the UC320 WAN settings with my username and password but it would not connect to the internet.
When I conenct the Vigor 120 to my laptop ethernet port and configure it with my ADSL username and password, it connects imediately to the internet.
Anyone had any luck getting a Vigor 120 to work with the UC320?
Join us for an exclusive Cisco Customer Connection online briefing: Introducing Cisco Business Wireless Access Points and Mesh Extenders on February 25 at 8 am PT. Cisco product managers will provide a technical deep dive on these new wireless products t...
QuestionDear All,I'm currently looking for firmware version 22.214.171.124 for Linksys SPA400 Analog Telephony Gateway. Unfortunately, my device was bricked and I was able to recover it using a recovery tool and recovery firmware version 126.96.36.199 but can't find v...
Change in ASD Automatic Software Download Feature
Dec 13th, 2019
Cisco RV160, 260, 340, and 345 Series Routers
Due to an API change in Cisco’s software download platform the Automatic Download Feature (ASD) on RV series routers will be temporarily ...
SFP Module Support List for RV160x and RV260x Devices
Small form-factor pluggable (SFP) ports are included on the RV160 and 260 routers to allow the use of optical SFP transceiver modules. SFP’s convert the optical signals to electrical signals. SFP’s al...