cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to the Cisco Small Business Community

Have a question? Click on a topic board below to get started in the community.

881
Views
0
Helpful
3
Replies
jeremyneedle
Beginner

UC500 - Configuring fax to have "call-forward busy" behavior

This particular customer receives a LOT of incoming faxes. As such they have 2 fax machines: primary and secondary.

As it stands now, incoming faxes all go to the primary fax. However I want to add a configuration, such that, if a busy signal is detected, the UC can automatically forward this to the secondary fax machine

This seems easy to do w/ an ephone-dn config...is there a way to associate that w/ a pots dial-peer? I feel like I'm missing part of the big picture

Can someone point me in the right direction?

2 ACCEPTED SOLUTIONS

Accepted Solutions
Marcos Hernandez
Collaborator

!

dial-peer voice 5500 pots

destination-pattern 333

port 0/0/0

!

dial-peer voice 5501 pots

destination-pattern 333

port 0/0/1

preference 1

!

Marcos

View solution in original post

aaronc123
Beginner

I don't think that you can do this with CCA ... but you could to try something like this:

dial-peer voice 20001 pots
destination-pattern 1001
preference 1
no huntstop
port 1/0/1


dial-peer voice 20002 pots
destination-pattern 1001
preference 2
no huntstop
port 1/0/2

1) incoming call matches extension 1001

2) Two matches exist ... pick preference 1

3) Ring -> Busy

4) No huntstop, so keep trying

5) ring preference 2

That said ... I don't have time to mock this up in the lab untill tomorrow ...

View solution in original post

3 REPLIES 3
Marcos Hernandez
Collaborator

!

dial-peer voice 5500 pots

destination-pattern 333

port 0/0/0

!

dial-peer voice 5501 pots

destination-pattern 333

port 0/0/1

preference 1

!

Marcos

View solution in original post

aaronc123
Beginner

I don't think that you can do this with CCA ... but you could to try something like this:

dial-peer voice 20001 pots
destination-pattern 1001
preference 1
no huntstop
port 1/0/1


dial-peer voice 20002 pots
destination-pattern 1001
preference 2
no huntstop
port 1/0/2

1) incoming call matches extension 1001

2) Two matches exist ... pick preference 1

3) Ring -> Busy

4) No huntstop, so keep trying

5) ring preference 2

That said ... I don't have time to mock this up in the lab untill tomorrow ...

View solution in original post

jeremyneedle
Beginner

Thanks guys! This took care of it.

This widget could not be displayed.