cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4494
Views
0
Helpful
1
Replies

uc520 antenna extension

8jschmidt
Level 1
Level 1

? how to extend the antenna built into the uc520?  i,e. RP-TNC (ReversePolarity-Threaded Neill-Concelman) extension cable..

what cable spec / authority / for:

RG (Radio Grade) coaxial cable.

50' extension, male to female RP-TNC connectors.

1 Reply 1

Saurabh Verma
Level 4
Level 4

Hi, you can hook up any RPTNC coax extension cable to attach to a remote antenna. Any of the: AIR-CABxxxLL-R listed below will work.

HTH,

Saurabh


Cisco Part   Number

Type of   Cable

Description

Loss at 2.4   GHz

Loss at 5.8   GHz

AIR-CAB005LL-N

Interconnect

5-ft low loss   cable, one straight N connector, one 90-degree N connector

0.5 dB

0.8 dB

AIR-CAB005LL-R

Interconnect

5-ft low loss   cable, one RP-TNC plug, one RP-TNC jack

0.5 dB

0.8 dB

AIR-CAB010LL-N

Interconnect

10-ft low loss   cable, one straight N connector, one 90-degree N connector

0.9 dB

1.5 dB

AIR-CAB020LL-R

Interconnect

20-ft low loss   cable, one RP-TNC plug, one RP-TNC jack

1.3 dB

2.5 dB

AIR-CAB050LL-R

Interconnect

50-ft low loss   cable, one RP-TNC plug, one RP-TNC jack

3.4 dB

5.75 dB

AIR-CAB100ULL-R

Interconnect

100-ft ultra low   loss cable, one RP-TNC plug, one RP-TNC jack

4.4 dB

7.25 dB

AIR-CAB150ULL-R

Interconnect

150-ft ultra   low loss cable, one RP-TNC plug, one RP-TNC jack

6.6 dB

11 dB

AIR-ACC2537-060

Bulkhead   Extender

5-ft (60 inches)   RG-58 type cable with one RP-TNC plug and one RP-TNC jack

2 dB

3 dB

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: