cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to the Cisco Small Business Community

Have a question? Click on a topic board below to get started in the community.
Get the latest news in this issue of the Cisco Small Business Monthly Newsletter

571
Views
0
Helpful
1
Replies
Highlighted
Beginner

UC520 Issues after Restore

Hi,

I just purchased a used UC520W for home office. I reset to factory defaults by copying the factory config (UC520W-16U-4FXO-K9-factory.cfg) to the startup.

I plug a PC into 0/1/0 (1st of the 8 POE Ports), and the machine is not reciving a IP from DHCP. I tried to set a static IP, etc however no matter what I do I cannot connect to the UC520 from CCA.

This UC520 will be used only for Call Manager. Wish to just plug into network along with the phones. Routing & switching is done with other cisco gear. Also, I wish to use the WLAN in the UC520 for a single ssid for my 7925's to connect to.

Phones & PC's are all on one VLAN now.

Any help would be appeticated.

Thank You!

1 REPLY 1
Highlighted
Advocate

Duplicate of https:/