06-17-2010 03:14 PM - edited 03-21-2019 02:41 AM
Hi All
I have this very weird problem (at least for me)
I have a UC520 connected to an ASA5510 via Site-to-Site VPN.
I can ping from clients behind UC520 to client behind ASA5510.
I can ping from clients behind ASA5510 to client behind UC520
I can access services (like RDP) from clients behind UC520 to client behind ASA5510
I can't access services (like RDP, HTTP) from clients behind ASA5510 to client behind UC520
Does anyone have a clue where i need to look? I tried to rule out all access list by (temporarily) making a permit ip any any line in these.
I think it must be some kind of NAT issue, but im not sure.
Thanks in advance
Solved! Go to Solution.
06-18-2010 03:05 PM
This is fun
To humor me can you set the MTU to 1400 on both inside segments/interfaces
06-18-2010 03:11 PM
OMG! 192.168.10.11 and .31 actually did have a wrong default gateway defined - i could kill the old IT-administrator for making this wrong!!!!
Guess what, i can access 192.168.10.11 and 192.168.10.31 without any problems now.
Can't believe you nailed this one, we could probably have been going on for hours of configuration-debugging without any results.
06-18-2010 03:15 PM
Glad it's fixed.
06-18-2010 03:15 PM
Bob and djh278778
Just want to thank you guys alot - help was really appreciated
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: