I am opening a mid sized retail shop.
I have (2) 7970, (4) 7940, and (1) 7925.
I need 1 auto antendant menu (when call comes in via fxo line), 1 FXO Line for in/out bound calling, and 1 voice mailbox that sits on an extension.
Would it be possible to setup the uc520 just for handling phones, and use a cisco smb router for DHCP, WLAN, Firewall, etc?
Can my configuration all be done with the web gui, and CCA for the uc520?
I was looking at thee UC320W, however you cannot use any 7900 series phones, and I do not like how it handles user/phone assigment.
Solved! Go to Solution.
I can get access to a UC520 easier then the 540 or 560.
If I did decide to use the WLAN, and Firewire on the UC520, is there a web gui for that, or do I have to use cli?
The UC500 GUI is supposed to do everything.
Again, the best choice is to give the job to a professional, and not have to worry about.
Please refer to document which compare it's specification between UC540 and UC560.
With latest softwarepack upgrade,
UC540 has capability for 8-32 users. (32 users are maximum)
UC560 has capability for 16-138 users (138 users are maximum)
If you are expecting growth up to 50 users, you should consider UC560.
I have UC560 with 80 users and UC540 with 8 users for multi site.
With recent 8.6.1 softwarepack update, system is running without any problem so far.
Due to the time/budget restrictions, I think for the first few months I am going to stick with the basic uc320w, then move up to the UC540/560 later on.