07-16-2010 02:19 AM - last edited on 03-25-2019 10:52 PM by ciscomoderator
Hi Guys,
I have reset my UC520 back up from scratch as I had SIP issues and thought it was related to the UC520 where as it was not.
However I am trying to setup the vmail boxes again and as I go through the intial setup and when it asks me to record my name it cuts it off...
Out of my trying to record Brian Russell all I hear is Brian....
What do I need to change to record my full name?
Thanks
brian
Solved! Go to Solution.
07-16-2010 03:27 AM
In my experience, you just have to wait longer before terminating the recording.
07-16-2010 03:27 AM
Hi Brian, try pausing after saying Russell for a second or two and
then type pound. I have seen this too in CUE 7.1.3 and that's how I
get around it. I do not see it in the new CUE under test now. SWP
8.0.3 will have CUE 8.0.2.
Steve DiStefano
Technology Solutions Architect - Sales
Cisco Systems
Research Triangle Park
North Carolina, U.S.A
1.919.392.6219
www.cisco.com/smb
On Jul 16, 2010, at 2:20 AM, "brian.russell31@gmail.com"
07-16-2010 03:27 AM
In my experience, you just have to wait longer before terminating the recording.
07-16-2010 03:27 AM
Hi Brian, try pausing after saying Russell for a second or two and
then type pound. I have seen this too in CUE 7.1.3 and that's how I
get around it. I do not see it in the new CUE under test now. SWP
8.0.3 will have CUE 8.0.2.
Steve DiStefano
Technology Solutions Architect - Sales
Cisco Systems
Research Triangle Park
North Carolina, U.S.A
1.919.392.6219
www.cisco.com/smb
On Jul 16, 2010, at 2:20 AM, "brian.russell31@gmail.com"
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: