cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Please be advised, the GuideMe Wizard is no longer available on the Small Business Support Community. For search capability please use the community search field to find content related to Cisco Small Business documents, videos, and discussions.
1077
Views
0
Helpful
1
Replies
Highlighted
Beginner

UC520 VWIC hardware problem?

Hi,

I have this UC520 which has had a power surge. After booting it will now only display "error during spi read of vwic".

This is unfortunately not the optional VWIC because the error remains after removing the interface.

I don't need the vwic for communcations since the unit will be SIP trunking into our Broadsoft platform.

Is there a way to get around this or has the hardware died out on us?

This is what te boot screen looks like now:

UC500 series platform with 262144 Kbytes of main memory

Readonly ROMMON initialized
program load complete, entry point: 0x80015000, size: 0xb700
program load complete, entry point: 0x80015000, size: 0xb700

program load complete, entry point: 0x80020000, size: 0x1ac3950
Self decompressing the image : ######################################################################################################################################################################################################################################### [OK]

Smart Init is enabled
smart init is sizing iomem
  ID            MEMORY_REQ                 TYPE
error during spi read of vwic- 0
error during spi read of vwic- 1
error during spi read of vwic- 2
error during spi read of vwic- 3
                0X00135430 Onboard PVDM2 SIMM
                0X00003960 Onboard Ethernet
                0X0011D000 Onboard VPN
                0X000F3BB0 public buffer pools
                0X00703000 public particle pools
TOTAL:          0X00A4C940

If any of the above Memory Requirements are
"UNKNOWN", you may be using an unsupported
configuration or there is a software problem and
system operation may be compromised.
Rounded IOMEM up to: 10Mb.

adjusted iome size up to minimum size of: 0X00C00000
Using 4 percent iomem. [12Mb/256Mb]

              Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706

Cisco IOS Software, UC500 Software (UC500-ADVIPSERVICESK9-M), Version 12.4(20)T2, RELEASE SOFTWARE (fc4)
Technical Support:
http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Sun 01-Feb-09 00:18 by prod_rel_team

error during spi read of vwic- 0
error during spi read of vwic- 0
error during spi read of vwic- 0
error during spi read of vwic- 1
error during spi read of vwic- 1
error during spi read of vwic- 1
error during spi read of vwic- 2
error during spi read of vwic- 2
error during spi read of vwic- 2
error during spi read of vwic- 3
error during spi read of vwic- 3
error during spi read of vwic- 3
error during spi read of vwic- 4
error during spi read of vwic- 4
error during spi read of vwic- 4
error during spi read of vwic error during spi read of vwic error during spi read of vwic error during spi read of vwic error during spi read of vwic- error during spi read of vwic error during spi read of vwic error during spi read of vwic- error during spi read of vwic error during spi read of vwic error during spi read of vwic- error during spi read of vwic error during spi read of vwic error during spi read of vwic- error during spi read of vwic error during spi read of vwic error during spi read of vwic- error during spi read of vwic
etc. etc. etc.

Everyone's tags (4)
1 REPLY 1
Beginner

UC520 VWIC hardware problem?

I had a similar problem on one of these - in my case it was that the mezzanine card with the voice interfaces was improperly seated.  Generally, these are "no user servicable parts" units - which means you should reach out to TAC.  I was able to resolve my problem by removing the cover and reseating the mezzanine card, but that is most certainly an unsupported solution.