05-02-2012 01:04 PM - edited 03-21-2019 05:44 AM
We have a UC520 connected to a group of 7945 phones in the office, and Verizon POTS on the outside. If you're having a conversation with someone who happens to be an outside caller, is the conversation full duplex - meaning can both sides talk at the same time, and both sides hear the opposing side? Or is the conversation simplex switched so that only one person can talk at a time?
Thanks
Roscoe
05-06-2012 09:54 AM
I'll give that a shot on Monday. How do you set a default config on the fxo voice ports?
05-06-2012 10:17 AM
You can set the default settings on every setting of the port you can see in the running config e.g. "input gain -3" - the issue "default input gain" under voice-port config and will be set with its default value. I can paste tomorrow default configuration.
While you make changes in the voice-port settings after you finish with the changes every time issue shut - no shut on the port.
Best regards,
Alex
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide